For Westies-at-watkins.org check out Watkins 2019
For Empirevwcamping.org go to NY State news on the dashboard.
« previous next »
Pages: [1]

Author Topic: Vanagon Engine Tap?  (Read 4179 times)

0 Members and 1 Guest are viewing this topic.

cebulas

  • LiMBO NEWBEE
  • *
  • Posts: 4
    • View Profile
Vanagon Engine Tap?
« on: April 18, 2009, 08:18:05 PM »
I have an 85’ Westy with a loud tap.  I took a compression test and my #4 cylinder has zero compression.  There’s also an exhaust leak on the driver side of the engine.  I’m assuming I have a stuck exhaust valve.  Someone told me I could just replace that head and be done with it.  I’m thinking I need a rebuild.  I’m kind of learning as I go here.  Does anyone have some input here?
« Last Edit: April 19, 2009, 08:55:50 PM by cebulas »
Logged

cebulas

  • LiMBO NEWBEE
  • *
  • Posts: 4
    • View Profile
(No subject)
« Reply #1 on: April 18, 2009, 08:18:57 PM »
Should one replace one head without the other?  I have a youtube link with the noise.
« Last Edit: December 31, 1969, 07:00:00 PM by cebulas »
Logged

cebulas

  • LiMBO NEWBEE
  • *
  • Posts: 4
    • View Profile
(No subject)
« Reply #2 on: April 18, 2009, 08:19:42 PM »
« Last Edit: December 31, 1969, 07:00:00 PM by cebulas »
Logged

Vanagonjr

  • LiMBO BUS NUT
  • *****
  • Posts: 201
    • View Profile
(No subject)
« Reply #3 on: April 18, 2009, 09:04:28 PM »
As to replacing only one had, I'd say that would depend on how many miles are on the engine, or since the last times the heads were done.

I'd lean to doing both at the same times.  My $.02
John
« Last Edit: December 31, 1969, 07:00:00 PM by Vanagonjr »
Logged
86 Wolfsburg Westfalia Weekender (WWW)
Pages: [1]
« previous next »

For Westies-at-watkins.org check out Watkins 2019
For Empirevwcamping.org go to NY State news on the dashboard.